_ ESPRESSO

*Please be aware that your computer's color settings and your printer's replication of colors may vary slightly from the actual stain sample colors, which should always be the guide in making your final selection. This is not intended to provide the exact color of our wood finishes. *** Natural brings out the color in the wood. PLEASE NOTE: the color will vary across the bed project due to lighter and darker areas of the wood. (both Oak and Maple Wood). If you are looking for a consistant color, we recommend against a Natural finish. If you have any questions about the Natural finish, please ask us before ordering.

Our Finishing Process (top of page)

At The Bedder Way Co., not only do we take great pride in providing a space saving solution, but also a beautiful, REAL WOOD fine furniture addition to your home as well. We hand select only the finest Oak and Maple wood for the construction of our wall beds. We then utilize a 10-step finishing process to ensure your wall bed has an attractive and durable finish.

1. After every construction detail is double checked, all surfaces are sanded to achieve a fine furniture feel.
2. After the surfaces are sanded, all remaining dust is removed and the surfaces are wiped clean.
3. A deep penetrating stain is hand applied to reveal the natural beauty of the wood. All stained surfaces are evenly hand rubbed to eliminate any excess stain.
4. To achieve the classic look of hand stained furniture, each piece is slowly air-dried.
5. A specially formulated, pre-catalyzed sanding sealer is pressure applied, penetrating all wood surfaces for uniform protection.
6. All surfaces are lightly hand sanded, wiped down, and prepared for a second sealer coat.
7. A second coat of the same specially formulated, pre-catalyzed sanding sealer is pressure applied.
8. All surfaces are hand sanded for a final time to ensure a consistently smooth surface ready to accept the final finish coat. All surfaces are wiped down to remove all remaining dust.
9. A premium quality, pre-catalyzed, hi-solids lacquer topcoat is pressure applied to attain a handsome, durable satin finish.
10. Before every wall bed is packaged and made ready for shipping, they are inspected and polished, assuring each wall bed meets our high quality standards.

Our Finishes meet environmental standards as identified by the EPA. It also meets United States VOC regulations and is FREE of all Hazardous Air Pollutants (HAPs Free).

WOOD SPECIES     (top of page)

We offer two types of wood with our products, either Maple or Oak.

MAPLE Maple is mainly used for furniture, paneling and millwork, kitchen cabinets, moldings, doors, musical instruments, and turnings. Maple is often used as a substitute for Cherry and Birch wood. Maple has a white and light tannish brown heartwood, with darker colored pith flecks. The wood is generally straight-grained with a fine uniform smooth texture. The wood of Maple is heavy, hard and strong. It has very good bending properties, with good crushing strength and shock resistance.

RED OAK The Latin name for oak, Quercus, means "a fine tree." The oaks have been key in America's industrial transformation: railroad ties, wheels, plows, looms, barrels and, of course, furniture and floors. The oak is the state tree of New Jersey. The sapwood of red oak is white to light brown and the heartwood is a pinkish reddish brown. The wood is similar in general appearance to white oak, but with a slightly less pronounced figure due to the smaller rays. The wood is mostly straight-grained, with a coarse texture. The wood is hard and heavy, with medium bending strength and stiffness and high crushing strength. It is very good for steam bending. Great wear-resistance.

As a member of the American Forests (R) Global ReLeaf campaign , The Bedder Way Co. donates funds each year that go towards planting new trees in areas of need. In 2009 - 100 trees were planted as part of the California Wildfire ReLeaf project.

HARDWARE (handles)      (top of page)

Below are our standard hardware for use with our different face styles on both our Vertical and Horizontal Wall Beds and Side Cabinets. Not all hardware is available on every face style. Each face style has its on choice for color and style of hardware based on the design of the wall bed. See each wall bed for style and color option.

PROVIDE YOUR OWN HARDWARE

If you are interested in providing your own hardware for us to place on your project before we ship out your wall bed, please contact us to go over the details. We must receive your hardware before production of your wall bed can begin. Failure to provide the hardware in a timely manner, can push back your lead-time.